What Is The "Reseal" For Vers-a-cover Decorative Concrete
This page contains frequently asked questions about Ovation Concrete Countertop SealerTM.
Summit Questions about Ovation
- Where can I observe the instructions?
- How does Ovation compare to Omega?
- Can I put Omega over Ovation / Ovation over Omega?
- What sheens are available?
- How do I fix the surface to seal?
- Tin I dry grind to prepare the surface for Ovation? I usually do dry grinding instead of moisture, or I'one thousand doing a reseal in someone'southward kitchen. Or I already dry out ground!
- How can I reseal my erstwhile concrete countertops with Ovation?
Overview
- How is Ovation Concrete Countertop SealerTM different?
- Where can I buy Ovation Concrete Countertop SealerTM?
- What is the coverage and cost per square human foot?
- What sheens are available?
- Does Ovation enhance the color of the concrete (darken information technology)?
- How does Ovation compare to Omega?
- Can I put Omega over Ovation / Ovation over Omega?
- How does it compare to [other popular sealer]?
- What happens if Ovation freezes?
Application Process
- Where can I find the instructions?
- What equipment is required to apply Ovation?
- What is the shelf life?
Care and Maintenance
- How do I clean surfaces sealed with Ovation?
- Can I bleach concrete countertops sealed with Ovation?
- How often does it need to be reapplied or resealed?
Stain and Scratch Resistance
- What test data do you accept?
- How many total coats and how long did you wait for information technology to cure before the testing?
- Does it stand up to mustard?
- Does it stand up upward to acetone? Booze?
- Is it grease/oil resistant?
- Volition it foreclose water marks?
- How does information technology perform with respect to scratches?
- Can scratches exist repaired?
- How does it compare to [other pop sealer] when information technology comes to chafe resistance?
- Why would I want to use a blanket that might scratch if there are penetrating treatments out at that place that claim to provide stain and acrid resistance?
Other Properties
- Can I put hot pots on it?
- Tin I cut on it?
- Is information technology food condom?
Where can information technology be used?
- Will Ovation work on all concrete?
- Can Ovation exist used in wet areas such every bit sinks, tubs and showers?
- Tin can Ovation exist used on fire features?
- Do you recommend it for outdoor projects?
- How can I employ Ovation to big vertical surfaces such as waterfall ends of a table or island?
- Volition Ovation attach to glass and metal?
- Can Ovation be applied over a densifier?
- Tin Ovation be practical over acid stains?
Concrete Surface Grooming
- How do I prepare the surface to seal?
- Can I dry out grind to prepare the surface for Ovation? I usually do dry grinding instead of wet, or I'm doing a reseal in someone'southward kitchen. Or I already dry ground!
Curing
- How long does information technology have for Ovation to cure completely and gain its full performance?
Common Issues and Troubleshooting
- I have a technical issue with Ovation. How exercise I get aid?
- I practical the first coat, and at that place are nighttime lines/lite lines/blotches everywhere. What should I practise?
- What if I become grit in the sealer? And if I don't discover dust in the terminate until the next twenty-four hour period, and the surface is bumpy?
- I know Ovation is supposed to be fine for wet areas, but I am seeing some h2o penetration. What's going on?
- In that location is milky white balance stuck to the inside of the bottle. Should I exist concerned?
Resealing and Compatibility with Other Sealers
- Tin can Ovation be applied over Omega, and vice versa?
- How can I reseal my quondam physical countertops with Ovation?
- I am non happy with the operation of [other sealer], and would like to reseal. Can Ovation be applied right over our current sealer?
- I'g because priming the concrete with [pop reactive treatment] followed past Ovation acme coats. The reasoning is that the [popular reactive handling] will brand the concrete itself stain/acid resistant, and Ovation will provide an additional concrete bulwark that is also stain/acrid resistant.
Q: How is Ovation Concrete Countertop SealerTM different?
A: Ovation is a revolutionary new single component, water based concrete countertop sealer that also offers splendid performance. In the by, single component sealer choices were express to under-performing acrylics or flammable solvent-based treatments. Ovation is water based, food prophylactic, non-flammable and can be used indoors and outdoors. It'south easy plenty for DIY physical countertop projects, and high performance plenty for pro projects.
Ovation: Condom. Simple. Constructive. The simple sealer for anybody.
Acme
Q: How does Ovation compare to Omega?
A: Omega is a professional class sealer that requires precise mixing, a carve up priming procedure, and provides extreme chemical resistance and stain protection. Ovation was formulated to be simple, easy to use for DIY physical countertops, and offer good protection provided basic care is exercised.
Please meet this commodity for a detailed comparing.
Q: Where tin can I buy Ovation Concrete Countertop SealerTM?
A: Click here for purchasing data.
Top
Q: What is the coverage and toll per square foot?
A: A 16 oz bottle covers approximately 50 to 100 sq ft using 4 coats, depending on the porosity of your concrete. Spend only $59.99, for $0.sixty per sq ft at maximum coverage to $1.20 per sq ft at minimum coverage.
A 64 oz bottle covers approximately 200 to 400 sq ft for only $159.99. Toll per sq ft is $0.40 at maximum coverage to $0.lxxx at minimum coverage.
Top
Q: Where can I observe the instructions?
A: Click here for the Ovation instructions. It is essential to watch and read the total documentation earlier applying the sealer.
Top
Q: What equipment is required to apply Ovation?
A: Ovation is applied with cream rollers. It is of import to use high quality foam rollers, considering this will issue in a improve surface finish quality. You may purchase packs of foam rollers too as handles from the Sealers category in our online store.
Peak
Q: I have a technical event with Ovation. How practise I go assist?
A: First, please be sure that you have read this FAQ, read the written instructions, and viewed the extensive instructional videos. If you still have issues, in club to assist you properly nosotros need consummate and detailed information. Please fill out this form for sealer technical support.
Top
Q: What test data do you take?
A: All-encompassing testing for stain and acrid resistance has been performed following the procedure explained hither. Performance is excellent at 1 hr. Ovation stands up to many substances well past 1 60 minutes, but in general we recommend that yous clean upward spills promptly.
Hither are the detailed results.
(Please notation: Acetone caused damage in less than 1 hour. Please see beneath for further information about acetone and alcohol.)
Meridian
Q: How many full coats and how long did you wait for it to cure before the testing?
A: Testing was done on 4 coats, when the finish was 2 weeks sometime. This represents typical long-term performance. Early functioning was very expert too, but hard to characterize, equally the finish is still curing when information technology's only a couple days old. Sealers cure and gain functioning in a similar mode to how physical cures and gains strength over time. A sealer can be dry to the touch, but that does not mean it has achieved its full protection.
Acme
Q: Will Ovation work on all physical?
A: Yep and no. Of course the surface of the physical has to be correctly prepared. Even on correctly prepared concrete, although Ovation's operation is not related to the kind of physical information technology's practical to, its appearance can be. Unlike physical mix designs, casting techniques, curing regimens, surface processing techniques, environmental weather, etc. will influence how well Ovation is practical and how information technology looks.
In particular, very porous concrete can present challenges, showing dark lines that are sometimes interpreted as roller marks. Please see below for details on dealing with porous concrete. Bear in mind most DIY concrete that uses ordinary dwelling eye concrete volition probable be more porous every bit compared to professional person course concrete fabricated for concrete countertops. Highly porous physical will require more sealer, especially for the first glaze.
It's strongly recommended to examination Ovation, or any sealer, on a trial sample before sealing a real project for the outset time. Do in timing and application method is essential, because the issue is often direct related to the skill and intendance of the person applying the sealer.
Acme
Q: Does it stand up to mustard?
A: Mustard is an farthermost staining agent due to the coloring (oft turmeric) and acidity. Similarly, ruby-red wine, and java are extreme staining agents. These substances will make a slight stain on Ovation (a piffling color, not carving) later 1 hour or more.
Only the surface of the sealer stains – the physical does not stain – and it is stock-still easily with bleach. Simply saturate a cotton brawl or paper towel with bleach and permit sit down on the stained area. Bleach will non harm Ovation upwardly to 24 hours exposure.
The existent issue would exist if Ovation were susceptible to acid etching. Many of these staining agents are as well acidic, and if the acid ate through Ovation to the concrete, non only would the sealer be permanently damaged, but besides the concrete would be damaged. Fortunately Ovation is impervious to acids such every bit vinegar and lemon juice up to one hour.
I food substance that is particularly challenging for Ovation is Tabasco Sauce (a brand of hot pepper sauce). Tabasco Sauce can permanently harm the sealer if left on too long. The general rule of thumb for Ovation is to wipe up spills promptly, and in general most substances should not be allowed to sit down for more than i hour.
Top
Q: Does it stand to acetone? Alcohol?
A: No. Y'all should take care not to become acetone on a surface sealed with Ovation. Isopropyl booze is also damaging to Ovation. Acetone causes damage in less than ane hour; alcohol takes longer to cause damage.
These solvents will dissolve Ovation and cause it to get very soft and lose its protective ability. Wiping up spilled acetone can physically remove cured Ovation.
The harm from acetone and alcohol may not be readily apparent, but the solvents do touch on the finish and reduce its power to protect the surface.
Note that drinking alcohol such equally wine is different from isopropyl alcohol. Ovation performs very well confronting wine, and in fact ruddy vino was one of the substances tested which caused no damage well beyond 1 hour of exposure.
Height
Q: Is information technology grease/oil resistant?
A: Vegetable/olive oil has no effect on Ovation upwardly to i hr of exposure.
Superlative
Q. Will it preclude h2o marks?
A: Ovation is a breathable terminate. After some fourth dimension, h2o will go through the coating of Ovation and soak into the concrete. These are not water marks in the sealer, they are simply moisture concrete. The concrete will dry out on its ain. See below about h2o penetration.
Note that Ovation does NOT allow through particles other than water, such as the staining agents in cerise wine or the acidic substances in lemon juice. This is considering of the differing molecular weights of water and these other substances.
Height
Q: Can Ovation exist used in wet areas such every bit sinks, tubs and showers?
A: Yep, but keep in mind as explained higher up, Ovation will allow h2o to pass through and darken the concrete underneath.
Top
Q: I know Ovation is supposed to be fine for moisture areas, but I am seeing some water penetration. What'due south going on?
A: Ovation is a breathable finish. This ways that water will go through the sealer and wet the concrete underneath. This causes no harm to either the sealer or the concrete and volition dry out out on its own. Many natural stones (granites) exhibit the aforementioned behavior, especially in bathrooms, and this is no crusade for concern.
Summit
Q: There is milky white residue stuck to the inside of the bottle. Should I be concerned?
A: A small amount of the matting agent will settle out and get stuck to the inside of the bottle, and it will non mix in fifty-fifty with vigorous shaking. This is not a cause for concern. The amount of matting agent that is stuck to the inside of the bottle is non enough to affect the sheen of the sealer.
Summit
Q: Is it nutrient safe?
A: Yes. Once Ovation is cured it is completely food prophylactic and inert.
The nearly "toxic" chemical in Ovation is ammonia, which is naturally occurring throughout the environment in the air, soil, and water, and in plants and animals, including humans. Ammonia is also constitute in many household and industrial cleaners. Once cured, Ovation has no remaining ammonia or ammonia odor.
Peak
Q: What is the shelf life?
A: Ovation has a long shelf life of 2 years, stored in an airtight container either diluted or undiluted.
Height
Q: How long does it take for Ovation to cure completely and gain its full performance?
A: Just like physical, sealers demand to cure. You wouldn't expect your concrete to have full forcefulness after merely 24 hours – although information technology may be strong enough to handle, it will proceeds strength over fourth dimension.
Typically you should expect near-full cure of Ovation in about seven days, depending on temperature. Just like physical, Ovation continues to mature and gain operation over time, and you will notice an increase in the surface hardness and a change in how it feels as time goes on. The degree of alter slows and diminishes after a nigh week or 2.
Every bit Ovation cures, it gains stain and acid resistance well by 1 hour of exposure.
Top
Q: What sheens are available?
A: Satin and gloss.
Ovation Gloss is the newest addition to CCI's line of state-of-the-art concrete countertop sealers. Ovation Gloss now gives DIY'ers and pro-fabricators a true glossy sealer selection.
Note that glossy finishes are highly reflective and thus highlight the texture of the concrete and the quality of the application. They also tend to evidence clay, fingerprints and scuff marks more than low-sheen finishes. Washed well they look neat. Done poorly they look plasticky and tin can accentuate mistakes.
- The base chemistry of Ovation Gloss is identical to the original satin Ovation, except without the matting agent.
- The mixing and application processes are identical, as are the performance benefits.
- For best results, the concrete should be polish and apartment, and honed to a grit no effectively than 400 grit.
- It takes a minimum of four coats to achieve the full gloss level. Fewer coats will appear duller because of the ultra-sparse nature of each layer, and an insufficient build of sealer will bear witness the concrete's microtexture, making the surface less glossy.
- Ovation Gloss is non-color enhancing, just like satin Ovation.
- Ovation Gloss tin can exist practical over Omega the same way satin Ovation can. Click here for more information about combining Ovation and Omega.
Top
Q: Does Ovation heighten the colour of the concrete (darken it)?
A: Ovation is very slightly color enhancing, significant that it typically very slightly darkens the colour of the concrete. (Color enhancement is a different property than the sheen of the finish.)
The degree of color enhancement varies depending upon the physical and its history. How it was cured and processed, every bit well as the ingredients in the concrete, influence how shut to or how far from water-wet the physical will look. The color of the concrete also has a large effect on how much the concrete darkens: dark colored concrete will heighten far more than than calorie-free colored concrete.
At that place is no way to predict exactly how much Ovation will color enhance your concrete, because of the extreme variability in these factors. We recommend you seal a sample before using Ovation on a full projection.
Please annotation that Ovation and Omega have very dissimilar color enhancing properties. The exact same slice of concrete sealed with Ovation versus Omega will look very different. Here is a photo of concrete with Ovation practical on the left Omega applied on the right. Blank concrete is in the heart.
Elevation
Q: How oft does it need to be reapplied or resealed?
A: Never, unless you subject it to extreme corruption (like using your countertop as a cut board). This question stems from the outdated practice of using soft, temporary finishes similar acrylic sealers to "seal" physical countertops. Ovation won't degrade on its own, but abuse, neglect and physical harm will require resealing. Take care of the stop and you won't need to reapply it. Fail and abuse information technology and you probable will need to.
Top
Q: Do you recommend information technology for outdoor projects?
A: Admittedly. It is UV stable and fine for outdoors in all moisture/dry and freeze/thaw weather condition. Note the data about water marks.
Top
Q: Tin I put hot pots on it?
A: No. Ovation is not heat resistant. Use trivets for hot pans. Do non use a irksome cooker on the surface of a countertop sealed with Ovation. If Ovation gets also hot, a permanent shiny mark volition appear because the sealer softens from the heat and the weight of the pot will press a shiny spot into the surface.
Peak
Q: How do I clean surfaces sealed with Ovation?
Maintenance and cleaning couldn't be easier. Damp cloths, mild detergents and other water-based cleansers with neutral pH are all that are needed. Examples are 409, Fantastik, Windex, and Elementary Green. Vinegar, bleach and bleach-based cleansers are adequate.
Wipe gently and exercise non scrub.
Avoid harsh, acidic cleaners and solvents. Abrasive cleansers or scrubbers should never be used. These include Ajax, Comet, Brillo pads and 3M scrubbing pads, and all similar products. Annoying cleaning products volition scratch and damage the surface, compromising the sealer'southward ability to protect the concrete.
Tiptop
Q: Tin I bleach physical countertops sealed with Ovation?
A: Yes! Ovation is completely impervious to bleach, so it is very piece of cake to sanitize your concrete countertops only by wiping them with bleach and a soft fabric.
Height
Q: Can I cut on it?
A: No. There is no blanket you should cut on, considering unless a coating is fabricated of diamonds, it volition scratch. Use a cutting board!
Peak
Q: How does it perform with respect to scratches?
A: Ovation has skilful scratch resistance. Its scratch resistance is somewhat less than Omega, simply withal adept. It will not scratch under normal apply of simply placing objects on the counter. It will scratch if cut on with a pocketknife, or a abrupt object is dragged beyond the surface.
Acme
Q: Can scratches be repaired?
A: Aye, Ovation is like shooting fish in a barrel for the homeowner to repair if scratches practise occur. Please come across this commodity detailing how to repair scratches in Ovation Concrete Countertop Sealer.
Scratches should be taken intendance of immediately, or as soon every bit possible. Deep scratches tin penetrate the sealer and expose the concrete underneath. Stains that get into the concrete through the scratch are very difficult to remove.
Top
Q: How does it compare to [other popular sealer] when it comes to abrasion resistance?
A: The abrasion resistance of Ovation is good (although less than Omega), with a low Taber abrasor score (lower is better) – see the test results higher up. We don't have comparable data for other sealers, and therefore cannot comment on which is amend.
Elevation
Q: Why would I want to use a coating that might scratch if there are penetrating treatments out there that claim to provide stain and acid resistance?
A: In our experience over the by two decades, no penetrating handling has ever provided consistently satisfactory functioning with respect to stain and acrid resistance. Only coatings prevent substances from touching the physical, giving actual protection by forming a barrier.
Information technology is important to examination any sealer yourself (including Ovation) to verify the manufacturer's claims likewise as to familiarize yourself with the details of its functioning. We strongly recommend that you follow the rigorous stain and acid testing procedure before yous put whatsoever new (to you) sealer on a customer project – especially any treatment, because treatments allow substances to touch the concrete.
The debate between coatings and treatments has been raging in the concrete countertop manufacture for decades. Click here for a detailed article nigh this topic.
Meridian
Q: How practise I ready the surface to seal?
A: Surface prep is a critical part of success with any sealer. Please see these instructions for surface prep. Ovation and Omega take the same surface preparation process.
Top
Q: Can I dry grind to prepare the surface for Ovation? I normally do dry grinding instead of wet, or I'm doing a reseal in someone's kitchen. Or I already dry ground!
A: NO! Never dry grind physical that you lot plan to seal with Ovation.
Please come across this commodity for a detailed explanation of why, as well every bit 2 informative videos.
If you already dry ground the surface, information technology tin be fixed. Encounter this article.
Top
Q: I'm because priming the concrete with [popular reactive treatment] followed by Ovation top coats. The reasoning is that the [pop reactive treatment] will brand the concrete itself stain/acrid resistant, and Ovation volition provide an additional physical barrier that is too stain/acid resistant.
A: Be careful well-nigh applying treatments to concrete followed past whatever coating. About coatings require clean, dry, bare concrete with plenty microtexture (max 200 or 400 grit depending on the blanket) to bond to. Ovation nearly certainly should not get over [popular reactive treatment] or any other penetrating treatment (densifier) with a lithium/potassium/sodium silicate or silicanate or siloxane chemistry. We have not tested Ovation in these circumstances.
What you lot are trying to achieve is a completely impervious organization that even if it scratches and staining agent/acid/oil gets through the scratches, the concrete underneath will not stain. Simply what you're creating is a bonding problem.
The unfortunate truth is that in that location is no perfect sealer. You tin can choose stain/acrid resistance, or you can choose scratch resistance. You tin can't accept both. As stated above, "In our experience over the past ii decades, no penetrating treatment has ever provided consistently satisfactory functioning with respect to stain resistance, acid resistance and even water resistance."
We believe that stain/acid resistance is far more of import. Click here for a detailed article about this topic.
Top
Q: Can Ovation exist applied over a densifier?
A: It can, simply it should non be. Applying Ovation over a densifier involves a lot of work, and doing so is risky. See the answer to the previous question about [popular reactive handling].
If you lot're non resealing but making a new countertop, think about what you are trying to achieve by using a densifier, and whether information technology's really necessary. Densifiers are typically used to decrease permeability and to make concrete harder for polishing. You don't need to decrease permeability when you lot're going to utilize a completely impermeable blanket. And you lot're not going to smoothen physical earlier applying Ovation, because you're going to stop at 200 or 400 grit. So densifiers brand no sense with Ovation or with any other coating.
Top
Q: Tin Ovation be applied over acid stains?
A: Yes, if you're talking about actual acid stains that work by penetrating the surface and reacting chemically with the calcium hydroxide in the concrete. In that case, Ovation should adhere fine with very thorough surface prep, as is the example for all blanket sealers. The acid stain must starting time be completely neutralized, and all residue scrubbed off. A "white towel" test will determine whether all of the residue has been removed or not. The concrete must then be well rinsed with water. The physical should then dry for 24 hours, since all the cleaning pumps a lot of moisture into the concrete.
Please annotation that turquoise acrid stains are vulnerable to wet and can plow black over time because the color isn't permanent in moist atmospheric condition (turquoise acid stains are copper based), and considering Ovation is a breathable finish. We take not tested Ovation over turquoise acid stains and recommend that if you are going to attempt this, that you perform testing first.
Other "stains" may actually exist pigmented coatings (e.g. Smith Paints), and Ovation may or may not attach to them. Excessive application of Buddy Rhodes Glazes can create adhesion issues (glaze to concrete and Ovation to glaze). Using pigmented coatings and glazes nether Ovation should be tested past the finish user, because application can vary so widely.
Top
Q: Will Ovation adhere to drinking glass and metal
A: Glass and metal are popular decorative embedments in physical countertops. Ovation volition adhere to properly prepared glass and metal such equally stainless steel.
Glass should exist diamond-honed to a grit no effectively than 200 to ensure good adhesion.
Metal needs to be thoroughly cleaned and scuffed to ensure good adhesion. We recommend mitt-sanding bare metal with a non-diamond abrasive such every bit silicon-carbide sandpaper to a dust no finer than 220. The metal should then be cleaned with acetone to remove residue, grease or other contaminants.
Notation that Ovation will non prevent rust or metal oxidation or corrosion, as Ovation is breathable and oxygen and water vapor will pass through the sealer.
Top
Q: Can Ovation be used on fire features?
A: Yes, if the fire feature is designed to keep the heat of the flame abroad from the concrete. If neither the concrete nor the sealer are going to heat up, this is a non-upshot. A skillful rule of pollex is that if it's besides hot to bear upon with your blank hands, it'south too hot for the physical or the sealer. Well-designed burn features don't permit the concrete to go too hot to touch, as that is a safe hazard for people.
Ovation softens at higher temps, but normally returns to normal once it cools. We recommend trivets for countertops sealed with Ovation, considering a hot pot set on the countertop volition evidence a shiny mark considering of the force per unit area from the pot's weight against the heat-softened finish.
Summit
Q: How can I use Ovation to large vertical surfaces such as waterfall ends of a tabular array or island?
A: Vertical surfaces are sealed by working in narrow vertical strips, starting at the lesser and working upward while that vertical strip of sealer remains moisture. Ovation is sprayed on and backrolled the same way as flat surfaces, just you may observe you demand to work a bit faster to chase runs and drips.
Top
Q: How does information technology compare to [other unmarried component sealer]?
A: That, as well as other company'south brands, is an acrylic sealer. Acrylic sealers perform very poorly, fifty-fifty for curt times, against acids and staining substances. Ovation performs superbly upwardly to 1 hour of exposure.
Top
Q: Tin Ovation be practical over Omega? And vice versa?
A: Yep and yes. Ovation and Omega are completely compatible.
Ovation over Omega: You would exercise this if you lot want the protection of Omega with the satin sheen of Ovation, without having to buff Omega to achieve a satin sheen. Merely let Omega cure plenty and so it's not sticky before applying a coat of Ovation.
Omega over Ovation: You would do this if you want the protection of Omega merely do non desire the corporeality of color enhancement that Omega provides. The first coat of Ovation provides very little color enhancement. Then the subsequent coats of Omega provide the protection. Let the coat of Ovation dry out for at least an hour before proceeding with Omega.
Q: I am not happy with the performance of [other sealer], and would similar to reseal. Tin Ovation be applied right over our current sealer?
A: If the other sealer is a blanket, likely yes. Virtually coatings only need to be scuff sanded (non sanded completely off), and then Ovation applied. Information technology has excellent adherence over a few other popular coatings we've tested. Ovation can be applied over Omega after a light scuff sand. This is sometimes done to increase the sheen of Omega.
Please note that Ovation should NOT be applied over penetrating or reactive treatments. Stone and tile "sealers" are repellents and will prevent Ovation from sticking to your concrete. Those types of products are terrible to use on concrete because of the poor level of protection they offering physical, and because they tin can prevent a skillful sealer from being used afterwards.
Top
Q: I applied the first coat, and in that location are dark lines/calorie-free lines/blotches everywhere. I thought this sealer was supposed to lay out easily with no roller marks. What should I do?
A: Don't panic! Your physical volition absorb a lot of h2o when you use the first glaze of Ovation. What you are seeing is variably-wet concrete. As the concrete and the sealer dry out, the surface will lighten and become uniform again. That is when you know it'south time to apply the side by side glaze of Ovation. Information technology usually takes well-nigh an hour, but cool or boiling conditions may cause it to take longer.
Peak
Q: What happens if I accidentally spill water on the sealer in the middle of the sealing process, for case after I've only finished the 2nd of four coats?
A: No worries, in the instance of water spilled during the sealer process only proceed with the next coat. However, if you lot spill water on the surface simply afterwards you accept completed the sealing procedure, before the sealer has cured, you should blot up the water, because information technology will leave a dull or dark mark on the sealer. After the sealer has cured completely (usually after 4 days depending on temperature), it is completely impervious to water.
Acme
Q: What if I get dust in the sealer? And if I don't detect dust in the finish until the next day, and the surface is bumpy?
A: Dust is an issue in whatever store, but Ovation is very forgiving. If you notice dust, particles, pilus, or fibers in the surface while sealing, they can just be brushed off with your finger or a paper towel. The mark left by doing this will disappear on its own.
If yous feel whatsoever roughness the next 24-hour interval after sealing, say if dust settled in in that location, but go over it with 1000 or 1200 dust sandpaper very lightly and quickly by paw. At that place's no machine sanding or buffing.
Peak
Q: What happens if Ovation freezes?
A: Ovation should never freeze. You will know information technology! Information technology becomes a hard, rubbery puck when frozen.
During the winter, please select an appropriate shipping method to get Ovation to y'all as speedily as possible. There are no refunds for product frozen in aircraft, every bit stated on our Order & Render Policy page.
Tiptop
Source: https://concretecountertopinstitute.com/free-training/ovation-concrete-countertop-sealer-faqs/
Posted by: huckabeesernis.blogspot.com
0 Response to "What Is The "Reseal" For Vers-a-cover Decorative Concrete"
Post a Comment